Emergency Procedures: Spills & Chemical Exposure

Home›Safety Resources›Emergency Procedures: Spills & Chemical Exposure
Emergency

Emergency Procedures: Spills & Chemical Exposure

Eye splash, skin contact, spills, inhalation — what to do in the first 60 seconds, and where your emergency equipment is.

📅   October 16, 2026⏱   1 min read
Emergency Procedures: Spills & Chemical Exposure

In a chemical emergency, the first 60 seconds matter most. Know these steps — and know where your eyewash station, safety shower, and spill kit are — before you start work.

Chemical in the eyes

Go to the nearest eyewash station immediately. Flush eyes with clean water for at least 15 minutes, holding the eyelids open. Remove contact lenses if present. Seek medical attention right away.

Chemical on the skin

Remove contaminated clothing while flushing the skin with plenty of water for at least 15 minutes. For large exposures, use the safety shower. Get medical help.

Spills

  • Alert others nearby.
  • Contain the spill if you can do so safely (absorbent pads, sand).
  • Clean up following SDS Section 6 — wear the PPE it specifies.
  • For large, toxic, or flammable spills: evacuate and call emergency services.

Inhalation

Move the person to fresh air. If breathing is difficult, call emergency services immediately.

Emergency numbers

United States: 911 for emergencies. For poisoning, call Poison Control: 1-800-222-1222. Post these numbers visibly in every work area.

⚠ Safety note: This is educational content. Always consult the chemical-specific Safety Data Sheet, product label, and qualified safety professionals before handling any chemical.

← Back to Safety Resources

Scroll to Top