Data Sheets
🧪 Sulfuric Acid
Sulfuric Acid — Safety Summary
H₂SO₄ (CAS 7664-93-9): corrosive strong acid. PPE, handling, storage, first aid, and spill response — summarized from the SDS.
Sulfuric acid (H₂SO₄, CAS 7664-93-9) is a strong, corrosive mineral acid used in batteries, fertilizer production, and laboratories. It causes severe skin burns and eye damage on contact. This is a summary — always consult the full supplier SDS before use.
Hazards
- Causes severe skin burns and eye damage (GHS: Corrosive).
- Reacts violently with water, releasing intense heat.
- Reacts with metals to release flammable hydrogen gas.
Required PPE
- Chemical-splash goggles (not just glasses).
- Acid-resistant gloves (nitrile or neoprene — check breakthrough time).
- Lab coat or acid-resistant apron.
Handling & storage
- Always add acid to water — never water to acid. Add slowly, with stirring.
- Store in a cool, dry, ventilated area, away from bases, metals, and organic materials.
- Keep containers tightly closed and clearly labeled.
First aid
- Eyes/skin: flush with water for at least 15–20 minutes; remove contaminated clothing; seek immediate medical attention.
- Inhalation: move to fresh air; call emergency services if breathing is difficult.
- Ingestion: do NOT induce vomiting — call emergency services immediately.
Spills
Contain with inert absorbent (sand, vermiculite). Neutralize carefully with sodium bicarbonate (baking soda) only if trained. Collect waste for proper disposal — never wash large amounts down the drain.
⚠ Safety note: This is educational content. Always consult the chemical-specific Safety Data Sheet, product label, and qualified safety professionals before handling any chemical.
